HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 266
group
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 266 highlights
Default The time to wait for the End-of-RIB marker is 180 seconds. Views BGP view Predefined user roles network-admin Parameters timer: Specifies the time to wait for the End-of-RIB marker, in the range of 3 to 300 seconds. Usage guidelines BGP uses this timer to control the time to receive updates from the peer. The timer is not advertised to the peer. After the GR Restarter and GR Helper reestablish a BGP session, they start this timer. If they do not complete route exchange before the timer expires, the GR Restarter does not receive new routes but updates its routing table and forwarding table with learned BGP routes, and the GR Helper removes the stale routes. This command controls the routing convergence speed. A smaller timer value means faster routing convergence but possibly results in incomplete routing information. Before configuring this command, you must enable the BGP GR capability. Examples # Set the time to wait for the End-of-RIB marker on the local end to 100 seconds. system-view [Sysname] bgp 100 [Sysname-bgp] graceful-restart [Sysname-bgp] graceful-restart timer wait-for-rib 100 Related commands • graceful-restart • graceful-restart timer restart group Use group to create a peer group. Use undo group to delete a peer group. Syntax group group-name [ external | internal ] undo group group-name Default No peer group is created. Views BGP view, BGP-VPN instance view 255