HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 168
filter-policy export, fast-reroute, route-policy, filter-policy, prefix-list, export
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 168 highlights
Syntax fast-reroute { auto | route-policy route-policy-name } undo fast-reroute Default IS-IS FRR is disabled. Views IS-IS view Predefined user roles network-admin Parameters auto: Calculates a backup next hop automatically for all routes. route-policy route-policy-name: Uses the specified routing policy to designate a backup next hop. The route-policy-name argument is a case-sensitive string of 1 to 63 characters. Usage guidelines Do not use FRR and BFD at the same time. Otherwise, FRR might fail to take effect. Example # Enable IS-IS FRR to automatically calculate a backup next hop for all routes. system-view [Sysname] isis [Sysname-isis-1] fast-reroute auto filter-policy export Use filter-policy export to configure IS-IS to filter redistributed routes. Use undo filter-policy export to remove the configuration. Syntax filter-policy { acl-number | prefix-list prefix-list-name | route-policy route-policy-name } export [ protocol [ process-id ] ] undo filter-policy export [ protocol [ process-id ] ] Views IS-IS view Predefined user roles network-admin Parameters acl-number: Specifies an ACL by its number in the range of 2000 to 3999 to filter redistributed routes. prefix-list prefix-list-name: Specifies an IPv4 prefix list by its name, a case-sensitive string of 1 to 63 characters, to filter redistributed routes by destination address. route-policy route-policy-name: Specifies a routing policy by its name, a case-sensitive string of 1 to 63 characters, to filter redistributed routes. 157