HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 317
reflector cluster-id, Default, Views, Predefined user roles, Usage guidelines, Examples
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 317 highlights
Default Route reflection between clients is enabled. Views BGP IPv4 unicast instance view, BGP-VPN IPv4 unicast instance view, BGP IPv6 unicast instance view Predefined user roles network-admin Usage guidelines When a route reflector is configured, and the clients of a route reflector are fully meshed, route reflection is unnecessary because it consumes more bandwidth resources. You can use the undo reflect between-clients command to disable route reflection instead of modifying network configuration or changing network topology. After route reflection is disabled between clients, routes can still be reflected between a client and a non-client. Examples # In BGP IPv4 unicast instance view, disable route reflection between clients. system-view [Sysname] bgp 100 [Sysname-bgp] ipv4-family unicast [Sysname-bgp-ipv4] undo reflect between-clients # In BGP-VPN IPv4 unicast instance view, disable route reflection between clients. system-view [Sysname] bgp 100 [Sysname-bgp] ip vpn-instance vpn1 [Sysname-bgp-vpn1] ipv4-family unicast [Sysname-bgp-ipv4-vpn1] undo reflect between-clients # In BGP IPv6 unicast instance view, disable route reflection between clients. system-view [Sysname] bgp 100 [Sysname-bgp] ipv6-family unicast [Sysname-bgp-ipv6] undo reflect between-clients Related commands • peer reflect-client • reflector cluster-id reflector cluster-id Use reflector cluster-id to configure the cluster ID for a route reflector. Use undo reflector cluster-id to restore the default. Syntax reflector cluster-id { cluster-id | ip-address } undo reflector cluster-id 306