HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 138
snmp trap rate-limit, spf-schedule-interval
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
snmp trap rate-limit Use snmp trap rate-limit to configure the number of output traps in a specific time. Use undo snmp trap rate-limit to restore the default. Syntax snmp trap rate-limit interval trap-interval count trap-number undo snmp trap rate-limit Default OSPF outputs 7 traps in 10 seconds. Views OSPF view Predefined user roles network-admin Parameters trap-interval: Specifies the trap output interval in the range of 1 to 60 seconds. trap-number: Specifies the number of output traps in a specific time, in the range of 0 to 300. Examples # Configure OSPF to output 10 traps in 5 seconds. system-view [Sysname] ospf 100 [Sysname-ospf-100] snmp trap rate-limit interval 5 count 10 spf-schedule-interval Use spf-schedule-interval to set the OSPF SPF calculation interval. Use undo spf-schedule-interval to restore the default. Syntax spf-schedule-interval maximum-interval [ minimum-interval [ incremental-interval ] ] undo spf-schedule-interval Default The maximum calculation interval is 5 seconds, the minimum interval is 50 milliseconds, and the incremental interval is 200 milliseconds. Views OSPF view Predefined user roles network-admin Parameters maximum-interval: Specifies the maximum OSPF SPF calculation interval in the range of 1 to 60 seconds. 127