HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 353
ripng, ripng default-route, Parameters, Examples, Syntax, Default, Views, Predefined user roles
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 353 highlights
network-operator Parameters process-id: Specifies a RIPng process by its ID in the range of 1 to 65535. Examples # Clear statistics for RIPng process 100. reset ripng 100 statistics ripng Use ripng to create a RIPng process and enter RIPng view. Use undo ripng to disable a RIPng process. Syntax ripng [ process-id ] [ vpn-instance vpn-instance-name ] undo ripng [ process-id ] Default No RIPng process is enabled. Views System view Predefined user roles network-admin Parameters process-id: Specifies a RIPng process by its ID in the range of 1 to 65535. The default value is 1. vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string of 1 to 31 characters. If no VPN is specified, the RIPng process runs on the public network. Usage guidelines Before you configure global RIPng parameters, you must create a RIPng process. This restriction does not apply to configuring interface RIPng parameters. If you disable a RIPng process, the configured RIPng parameters become invalid. Examples # Create RIPng process 100 and enter its view. system-view [Sysname] ripng 100 [Sysname-ripng-100] ripng default-route Use ripng default-route to configure a RIPng interface to advertise a default route with a specified metric. Use undo ripng default-route to disable a RIPng interface from sending a default route. 342