HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 46
Predefined user roles, Parameters, Examples, Table 10, Command output
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Predefined user roles network-admin network-operator Parameters process-id: Specifies a RIP process by its ID in the range of 1 to 65535. interface-type interface-number: Specifies an interface by its type and number. If no interface is specified, the command displays information about all RIP interfaces for the RIP process. Examples # Display information about all interfaces for RIP process 1. display rip 1 interface Interface: Vlan-interface12 Address/Mask: 1.1.1.1/24 Version: RIPv1 MetricIn: 0 MetricIn route policy: Not designated MetricOut: 1 MetricOut route policy: Not designated Split-horizon/Poison-reverse: On/Off Input/Output: On/On Default route: Off Current number of packets/Maximum number of packets: 0/2000 Table 10 Command output Field Interface Address/Mask Version MetricIn MetricIn route policy MetricOut MetricOut route policy Split-horizon Poison-reverse Input/Output Description Name of an interface running RIP. IP address and mask of the interface. RIP version running on the interface. Additional metric added to incoming routes. Name of the routing policy used to add an additional metric for incoming routes. If no routing policy is used, the field displays Not designated. Additional metric added to outgoing routes. Name of the routing policy used to add an additional routing metric for outgoing routes. If no routing policy is used, the field displays Not designated. Indicates whether split horizon is enabled: • on-Enabled. • off-Disabled. Indicates whether poison reverse is enabled: • on-Enabled. • off-Disabled. Indicates whether the interface is enabled to receive and send RIP messages: • on-Enabled. • off-Disabled. 35