HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 354
ripng enable
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 354 highlights
Syntax ripng default-route { only | originate } [ cost cost ] undo ripng default-route Default A RIPng process does not advertise a default route. Views Interface view Predefined user roles network-admin Parameters only: Advertises only an IPv6 default route (::/0). originate: Advertises an IPv6 default route (::/0) and other routes. cost: Specifies a cost for the default route, in the range of 1 to 15. The default is 1. Usage guidelines This command enables the interface to advertise a RIPng default route in a route update regardless of whether the default route exists in the local IPv6 routing table. Examples # Configure RIPng on VLAN-interface 100 to advertise only a default route. system-view [Sysname] interface vlan-interface 100 [Sysname-Vlan-interface100] ripng default-route only # Configure RIPng on VLAN-interface 101 to advertise a default route and other routes. system-view [Sysname] interface vlan-interface 101 [Sysname-Vlan-interface101] ripng default-route originate ripng enable Use ripng enable to enable RIPng on an interface. Use undo ripng enable to disable RIPng on an interface. Syntax ripng process-id enable undo ripng [ process-id ] enable Default RIPng is disabled on an interface. Views Interface view Predefined user roles network-admin 343