HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 164
display isis statistics
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 164 highlights
Admin Tag : - Src Count : 1 Flag : -/-/- Flags: D-Direct, R-Added to Rib, L-Advertised in LSPs, U-Up/Down Bit Set Table 42 Command output Field Route information for ISIS(1) ISIS(1) IPv4 Level-1 Forwarding Table ISIS(1) IPv4 Level-2 Forwarding Table IPV4 Dest Int. Cost Ext. Cost Admin Tag Src Count Flag Next Hop Interface ExitIndex Description Route information for IS-IS process 1. IS-IS IPv4 routing information for Level-1. IS-IS IPv4 routing information for Level-2. IPv4 destination. Internal cost. External cost. Tag. Count of advertising sources. Route state flag: • R-The route has been installed into the routing table. • L-The route has been flooded in an LSP. • U-Route leaking flag. Setting it to UP can prevent an LSP sent from L2 to L1 from being sent back to L2. Next hop. Output interface. Index of the output interface. display isis statistics Use display isis statistics to display IS-IS statistics. Syntax display isis statistics [ level-1 | level-1-2 | level-2 ] [ process-id ] Views Any view Predefined user roles network-admin network-operator Parameters level-1: Displays IS-IS Level-1 statistics. level-1-2: Displays IS-IS Level-1-2 statistics. level-2: Displays IS-IS Level-2 statistics. process-id: Displays statistics for an IS-IS process specified by its ID in the range of 1 to 65535. 153