HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 397

Examples # Configure the OSPFv3 neighbor dead time as 60 seconds for VLAN-interface 10. system-view [Sysname] interface vlan-interface 10 [Sysname-Vlan-interface10] ospfv3 timer dead 60 Related commands ospfv3 timer hello ospfv3 timer hello Use ospfv3 timer hello to configure the hello interval for an interface. Use undo ospfv3 timer hello to restore the default. Syntax ospfv3 timer hello seconds [ instance instance-id ] undo ospfv3 timer hello [ instance instance-id ] Default Views The hello interval is 10 seconds for P2P and broadcast interfaces, and is 30 seconds for P2MP or NBMA interfaces. Interface view Predefined user roles network-admin Parameters seconds: Specifies the hello interval in the range of 1 to 65535 seconds. instance-id: Specifies an instance by its ID in the range of 0 to 255. The default is 0. Usage guidelines The shorter the hello interval is, the faster the topology converges and the more resources are consumed. Make sure the hello interval on two neighboring interfaces is the same. Examples # Configure the hello interval as 20 seconds for VLAN-interface 10. system-view [Sysname] interface vlan-interface 10 [Sysname-Vlan-interface10] ospfv3 timer hello 20 Related commands ospfv3 timer dead ospfv3 timer poll Use ospfv3 timer poll to set the poll interval on an NBMA interface. Use undo ospfv3 timer poll to restore the default. 386