HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 25
Table 5, Command output
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Label: NULL BkLabel: NULL Tunnel ID: Invalid BkTunnel ID: Invalid RealNextHop: :: BkNextHop: N/A Interface: NULL0 BkInterface: N/A Destination: FF00::/8 Protocol: Direct SubProtID: 0x0 Cost: 0 Tag: 0 OrigTblID: 0x0 TableID: 0xa NBRID: 0x20000001 AttrID: 0xffffffff Flags: 0x10014 Label: NULL BkLabel: NULL Tunnel ID: Invalid BkTunnel ID: Invalid Table 5 Command output Process ID: 0 Age: 00h53m50s Preference: 0 State: Active NoAdv OrigVrf: default-vrf OrigAs: 0 LastAs: 0 Neighbor: :: OrigNextHop: :: RealNextHop: :: BkNextHop: N/A Interface: NULL0 BkInterface: N/A Field Destination Protocol SubProtID Age Cost Preference Tag State OrigTblID OrigVrf TableID OrigAs NBRID LastAs Description IPv6 address and prefix of the destination network or host. Protocol that installed the route. ID of the subprotocol for routing. Time for which the route has been in the routing table. Cost of the route. Preference of the route. Tag of the route. Route status: • Active-Active unicast route. • Adv-Route that can be advertised. • Inactive-Inactive route. • NoAdv-Route that the router must not advertise. • Vrrp-Routes generated by VRRP. • Nat-Routes generated by NAT. • TunE-Tunnel. Original routing table ID. Original VPN that the route belongs to. ID of the routing table. Original AS number. Neighbor ID of the route. Last AS number. 14