HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 346
display ripng route, Table 75, Command output
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 346 highlights
Field Poison-reverse MetricIn/MetricOut Default route Default route cost Description Indicates whether the poison reverse function is enabled: • On-Enabled. • Off-Disabled. Additional metric to incoming and outgoing routes. • Only-The interface advertises only a default route. • Originate-The interface advertises a default route and other RIPng routes. • Off-In this state, the interface does not advertise a default route. • In garbage-collect status-In this state, the interface advertises a default route with a metric of 16. Cost of the default route. display ripng route Use display ripng route to display all RIPng routes for a RIPng process. Syntax display ripng process-id route Views Any view Predefined user roles network-admin network-operator Parameters process-id: Specifies a RIPng process by its ID in the range of 1 to 65535. Examples # Display routing information for RIPng process 100. display ripng 1 route Route Flags: A - Aging, S - Suppressed, G - Garbage-collect Peer FE80::20C:29FF:FE7A:E3E4 on Vlan-interface12 Destination 1::/64, via FE80::20C:29FF:FE7A:E3E4, cost 1, tag 0, A, 7 secs Destination 2::2/128, via FE80::20C:29FF:FE7A:E3E4, cost 1, tag 0, A, 7 secs Table 75 Command output Field A-Aging S-Suppressed Description The route is in aging state. The route is in suppressed state. 335