HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 455
if-match ipv6, Table 102, Command output
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 455 highlights
Table 102 Command output Field Prefix-list6 Permitted Denied index permit 6::/64 ge le Description Name of the IPv6 prefix list. Number of routes satisfying the match criterion. Number of routes not satisfying the match criterion. Index number of an item. Match mode of the item: • permit. • deny. IPv6 address and prefix length for matching. Greater-equal, the lower prefix length. Less-equal, the upper prefix length. Related commands • ipv6 prefix-list • reset ipv6 prefix-list if-match ipv6 Use if-match ipv6 to match IPv6 routes whose destination, next hop, or source matches the specified IPv6 prefix list. Use undo if-match ipv6 to remove the configuration. Syntax if-match ipv6 { address | next-hop | route-source } { acl acl6-number | prefix-list prefix-list-name undo if-match ipv6 { address | next-hop | route-source } [ acl | prefix-list ] Default No IPv6 prefix list match criterion is configured. Views Routing policy node view Predefined user roles network-admin Parameters address: Matches the destination address of IPv6 routing information. next-hop: Matches the next hop of IPv6 routing information. route-source: Matches the source address of IPv6 routing information. acl acl6-number: Specifies an IPv6 ACL for filtering by its number in the range of 2000 to 3999 for address, and 2000 to 2999 for next-hop and route-source. prefix-list prefix-list-name: Specifies an IPv6 prefix list by its name, a case-sensitive string of 1 to 63 characters. 444