HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 37

Static routing commands delete static-routes all Use delete static-routes all to delete all static routes. Syntax delete [ vpn-instance vpn-instance-name ] static-routes all Views System view Predefined user roles network-admin Parameters vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string of 1 to 31 characters. Without this option, the command deletes all static routes for the public network. Usage guidelines When you use this command, the system will prompt you to confirm the operation before deleting all the static routes. To delete one static route, use the undo ip route-static command. To delete all static routes, including the default route, use the delete static-routes all command. Examples # Delete all static routes. system-view [Sysname] delete static-routes all Delete all IPv4 static routes. Continue?[Y/N]y Related commands ip route-static ip route-static Use ip route-static to configure a static route. Use undo ip route-static to delete a static route. Syntax ip route-static dest-address { mask | mask-length } { next-hop-address [ bfd control-packet bfd-source ip-address | permanent | track track-entry-number ] | interface-type interface-number [ next-hop-address ] [ backup-interface interface-type interface-number [ backup-nexthop backup-nexthop-address ] [ permanent ] | bfd { control-packet | echo-packet } | permanent ] | vpn-instance d-vpn-instance-name next-hop-address [ bfd control-packet bfd-source ip-address | permanent | track track-entry-number ] } [ preference preference-value ] [ tag tag-value ] [ description description-text ] 26