HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 451
if-match ip, Field, Description, ip prefix-list, undo if-match ip, address, next-hop, route-source
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 451 highlights
Table 101 Command output Field Prefix-list Permitted Denied index deny 6.6.6.0/24 ge le Description Name of the IPv4 prefix list. Number of routes satisfying the match criterion. Number of routes not satisfying the match criterion. Index of an item. Match mode of the item: • permit. • deny. IP address and mask. Greater-equal, the lower mask length. Less-equal, the upper mask length. Related commands • ip prefix-list • reset ip prefix-list if-match ip Use if-match ip to match IPv4 routes whose destination, next hop, or source matches the specified IPv4 prefix list. Use undo if-match ip to remove the configuration. Syntax if-match ip { address | next-hop | route-source } { acl acl-number | prefix-list prefix-list-name } undo if-match ip { address | next-hop | route-source } [ acl | prefix-list ] Default No IPv4 prefix list match criterion is configured. Views Routing policy node view Predefined user roles network-admin Parameters address: Matches the destination address of IPv4 routes. next-hop: Matches the next hop of IPv4 routes. route-source: Matches the source address of IPv4 route information. acl acl-number: Specifies an ACL by its number in the range of 2000 to 3999 for address, and in the range of 2000 to 2999 for next-hop and route-source. prefix-list prefix-list-name: Specifies an IP prefix list by its name, a case-sensitive string of 1 to 63 characters. 440