HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 61
rip input, rip metricin, Usage guidelines, Examples, Related commands, Syntax, Default, Views
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
cost: Specifies a cost for the default route, in the range of 1 to 15. The default is 1. no-originate: Advertises only non-default routes. Usage guidelines An interface that is enabled to advertise a default route does not receive any default route from RIP neighbors. Examples # Configure VLAN-interface 10 to advertise only a default route with a metric of 2. system-view [Sysname] interface vlan-interface 10 [Sysname-Vlan-interface10] rip default-route only cost 2 # Configure VLAN-interface 10 to advertise a default route with a metric of 2 and other routes. system-view [Sysname] interface vlan-interface 10 [Sysname-Vlan-interface10] rip default-route originate cost 2 Related commands default-route rip input Use rip input to enable an interface to receive RIP messages. Use undo rip input to disable an interface from receiving RIP messages. Syntax rip input undo rip input Default An interface is enabled to receive RIP messages. Views Interface view Predefined user roles network-admin Examples # Disable VLAN-interface 10 from receiving RIP messages. system-view [Sysname] interface vlan-interface 10 [Sysname-Vlan-interface10] undo rip input rip metricin Use rip metricin to configure an interface to add a metric to inbound routes. Use undo rip metricin to restore the default. 50