HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 49

Predefined user roles network-admin Parameters route-policy route-policy-name: Uses the specified routing policy to designate a backup next hop. The route-policy-name argument is a case-sensitive string of 1 to 63 characters. Usage guidelines RIP FRR is only effective for RIP routes that are learned from directly connected neighbors. Do not use RIP FRR and BFD for RIP at the same time. Otherwise, RIP FRR might fail to work. Equal-cost routes do not support RIP FRR. RIP FRR does not take effect when the backup route information is the same as the primary route information. Examples # Enable RIP FRR and use routing policy frr to specify a backup next hop. system-view [Sysname] bfd echo-source-ip 1.1.1.1 [Sysname] ip prefix-list abc index 10 permit 100.1.1.0 24 [Sysname] route-policy frr permit node 10 [Sysname-route-policy-frr-10] if-match ip address prefix-list abc [Sysname-route-policy-frr-10] apply fast-reroute backup-interface vlan-interface 1 backup-nexthop 193.1.1.8 [Sysname-route-policy-frr-10] quit [Sysname] rip 100 [Sysname-rip-100] fast-reroute route-policy frr filter-policy export Use filter-policy export to configure RIP to filter redistributed routes. Use undo filter-policy export to remove the filtering. Syntax filter-policy { acl-number | prefix-list prefix-list-name } export [ protocol [ process-id ] | interface-type interface-number ] undo filter-policy export [ protocol [ process-id ] | interface-type interface-number ] Default RIP does not filter redistributed routes. Views RIP view Predefined user roles network-admin Parameters acl-number: Specifies an ACL by its number in the range of 2000 to 3999 to filter redistributed routes. prefix-list prefix-list-name: Specifies an IP prefix list by its name, a string of 1 to 63 characters, to filter redistributed routes. 38