HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 291
peer ebgp-max-hop, Default, Views, Predefined user roles, Parameters, Examples, Syntax
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 291 highlights
Default No description information is configured for a peer or peer group. Views BGP view, BGP-VPN instance view Predefined user roles network-admin Parameters group-name: Specifies a peer group by its name, a case-sensitive string of 1 to 47 characters. The peer group must have been created. ip-address: Specifies a peer by its IP address. The peer must have been created. ipv6-address: Specifies a peer by its IPv6 address. The peer must have been created. description-text: Specifies a description for a peer or peer group, a case-sensitive string of 1 to 79 characters. Examples # In BGP view, configure a description for the peer group test as ISP1. system-view [Sysname] bgp 100 [Sysname-bgp] peer test description ISP1 # In BGP-VPN instance view, configure a description for the peer group test as ISP1. system-view [Sysname] bgp 100 [Sysname-bgp] ip vpn-instance vpn1 [Sysname-bgp-vpn1] peer test description ISP1 peer ebgp-max-hop Use peer ebgp-max-hop to enable BGP to establish an EBGP session to an indirectly-connected peer or peer group and specify the maximum hop count. Use undo peer ebgp-max-hop to restore the default. Syntax peer { group-name | ip-address | ipv6-address } ebgp-max-hop [ hop-count ] undo peer { group-name | ip-address | ipv6-address } ebgp-max-hop Default BGP does not establish an EBGP session to an indirectly-connected peer or peer group. Views BGP view, BGP-VPN instance view Predefined user roles network-admin 280