HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 62
rip metricout
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Syntax rip metricin [ route-policy route-policy-name ] value undo rip metricin Default The additional metric of an inbound route is 0. Views Interface view Predefined user roles network-admin Parameters route-policy route-policy-name: Uses the specified routing policy to add an additional metric for the routes matching it. The route-policy-name argument is a case-sensitive string of 1 to 63 characters. value: Add an additional metric to inbound routes, in the range of 0 to 16. Usage guidelines When a valid RIP route is received, the system adds a metric to it and then installs it into the routing table. The metric of the route received on the configured interface is then increased. If the sum of the additional metric and the original metric is greater than 16, the metric of the route will be 16. If a routing policy is referenced with the route-policy keyword, the following operations can be performed: • Routes matching the policy are added with the metric specified in the apply cost command configured in the policy. Routes not matching it are added with the metric specified in the rip metricout command. The rip metricout command does not support the + or - keyword-used to add or reduce a metric-specified in the apply cost command. • If the apply cost command is not configured in the policy, all the inbound routes are added with the metric specified in the rip metricout command. Examples # Configure VLAN-interface 10 to add a metric of 6 to the inbound route 1.0.0.0/8 and to add a metric of 2 to other inbound routes. system-view [Sysname] ip prefix-list 123 permit 1.0.0.0 8 [Sysname] route-policy abc permit node 0 [Sysname-route-policy-abc-10] if-match ip address prefix-list 123 [Sysname-route-policy-abc-10] apply cost 6 [Sysname-route-policy-abc-10] quit [Sysname] interface vlan-interface 10 [Sysname-Vlan-interface10] rip metricin route-policy abc 2 Related commands apply cost rip metricout Use rip metricout to configure an interface to add a metric to outbound routes. 51