HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 203

Usage guidelines By adjusting the LSP generation interval, you can prevent bandwidth and router resources from being over consumed due to frequent topology changes. When network changes are not frequent, the minimum-interval is adopted. If network changes become frequent, the LSP generation interval is incremented by the incremental-interval each time a generation occurs until the maximum-interval is reached. The minimum interval and the incremental interval cannot be greater than the maximum interval. Examples # Set the maximum interval, minimum interval, and incremental interval to 10 seconds, 100 milliseconds, and 200 milliseconds. system-view [Sysname] isis 1 [Sysname-isis-1]timer lsp-generation 10 100 200 timer lsp-max-age Use timer lsp-max-age to set the LSP maximum age in the LSDB. Use undo timer lsp-max-age to restore the default. Syntax timer lsp-max-age seconds undo timer lsp-max-age Default The LSP maximum age is 1200 seconds. Views IS-IS view Predefined user roles network-admin Parameters seconds: Specifies the LSP maximum aging time in the range of 1 to 65535 seconds. Examples # Set the maximum LSP age to 1500 seconds. system-view [Sysname] isis 1 [Sysname-isis-1] timer lsp-max-age 1500 Related commands timer lsp-refresh timer lsp-refresh Use timer lsp-refresh to configure the LSP refresh interval. Use undo timer lsp-refresh to restore the default. 192