HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 202
timer lsp-generation
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 202 highlights
level-2: Summarizes only the routes redistributed to Level-2. tag tag: Specifies a management tag in the range of 1 to 4294967295. Usage guidelines If no level is specified, only level-2 routes are summarized. If no topology is specified, routes for the base topology are summarized. You can summarize multiple contiguous networks into a single network to reduce the size of the routing table, as well as the size of LSP and LSDB generated by the router. You can summarize native IS-IS routes and redistributed routes. After summarization, the cost of the summary route is the smallest cost of those summarized routes. The router summarizes only routes generated from local LSPs. Examples # Configure a summary route of 202.0.0.0/8. system-view [Sysname] isis 1 [Sysname-isis-1] summary 202.0.0.0 255.0.0.0 timer lsp-generation Use timer lsp-generation to configure LSP generation interval. Use undo timer lsp-generation to remove the configuration. Syntax timer lsp-generation maximum-interval [ minimum-interval [ incremental-interval ] ] [ level-1 | level-2 ] undo timer lsp-generation [ level-1 | level-2 ] Default The maximum interval is 2 seconds, the minimum interval is 0 milliseconds, and the incremental interval is 0 milliseconds. Views IS-IS view Predefined user roles network-admin Parameters maximum-interval: Specifies the maximum interval in the range of 1 to 120 seconds. minimum-interval: Specifies the minimum interval in the range of 10 to 60000 milliseconds. incremental-interval: Specifies the incremental interval in the range of 10 to 60000 milliseconds. level-1: Applies the intervals to Level-1. level-2: Applies the intervals to Level-2. If no level is specified, the specified intervals apply to both Level-1 and Level-2. 191