HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 233
display bgp peer ipv6 unicast
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 233 highlights
Field Routing policy configured Description Routing policy configured for the peer. If no routing policy is specified, this field displays No routing policy is configured. # Display log information about BGP IPv4 unicast peer 1.1.1.1 for the public network. display bgp peer ipv4 1.1.1.1 log-info Peer : 1.1.1.1 Date Time State Notification Error/SubError 10-Jul-2008 15:46:17 Down 10-Jul-2008 09:23:00 Up 10-Jul-2008 07:46:17 Down 10-Jul-2008 06:23:00 Up 10-Jul-2008 05:46:17 Down Send Notification with Error 1/1 Message Header Error/Connection Not Synchronized Receive Notification with Error 3/2 UPDATE Message Error/Unsupported optional Parameter Send Notification with Error 6/4 Cease/Administrative Reset Table 53 Command output Field Peer Date Time State Notification Error/SubError Description IP address of the peer. Date on which the Notification was sent or received. Time at which the Notification was sent or received. BGP session state: • Up-The BGP session is in Established state. • Down-The BGP session is down. Error code of the Notification, indicating the cause of why the BGP session is down. • Error-Refers to the error code, which identifies the type of the Notification. • SubError-Refers to the error subcode of the Notification, which identifies the specific information about the reported error. display bgp peer ipv6 unicast Use display bgp peer ipv6 unicast to display BGP IPv6 unicast peer or peer group information. Syntax display bgp peer ipv6 [ unicast ] [ group-name log-info | ipv6-address { log-info | verbose } | verbose ] display bgp peer ipv6 [ unicast ] vpn-instance vpn-instance-name [ group-name log-info | ipv6-address { log-info | verbose } | verbose ] 222