HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 394
ospfv3 mtu-ignore, ospfv3 network-type, For PPP, LAPB, HDLC, and POS, the default network type is P2P.
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 394 highlights
ospfv3 mtu-ignore Use ospfv3 mtu-ignore to configure an interface to ignore MTU check during DD packet exchange. Use undo ospfv3 mtu-ignore to restore the default. Syntax ospfv3 mtu-ignore [ instance instance-id ] undo ospfv3 mtu-ignore [ instance instance-id ] Default An interface performs MTU check during DD packet exchange. Views Interface view Predefined user roles network-admin Parameters instance-id: Specifies an instance by its ID in the range of 0 to 255. The default is 0. Usage guidelines A neighbor relationship can be established only if the interface's MTU is the same as that of the peer. Examples # Configure VLAN-interface 10 that belongs to instance 1 to ignore MTU check during DD packet exchange. system-view [Sysname] interface vlan-interface 10 [Sysname-Vlan-interface10] ospfv3 mtu-ignore instance 1 ospfv3 network-type Use ospfv3 network-type to set the network type for an OSPFv3 interface. Use undo ospfv3 network-type to restore the default. Syntax ospfv3 network-type { broadcast | nbma | p2mp [ unicast ] | p2p } [ instance instance-id ] undo ospfv3 network-type [ instance instance-id ] Default The network type of an OSPFv3 interface depends on its link layer protocol: • For Ethernet and FDDI, the default network type is broadcast. • For ATM, FR, and X.25, the default network type is NBMA. • For PPP, LAPB, HDLC, and POS, the default network type is P2P. Views Interface view 383