HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 152
display isis interface
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 152 highlights
Field Restart t3 SA Bit Total number of interfaces Number of waiting LSPs Description T3 timer, in seconds. Whether SA is supported: • Supported. • Not supported. Total number of IS-IS interfaces. Number of LSPs not obtained by the GR Restarter from GR Helpers during LSDB synchronization. display isis interface Use display isis interface to display IS-IS interface information. Syntax display isis interface [ [ interface-type interface-number ] [ verbose ] | statistics ] [ process-id ] Views Any view Predefined user roles network-admin network-operator Parameters interface-type interface-number: Displays statistics of a specified IS-IS interface. verbose: Displays detailed information about an interface. If this keyword is not specified, this command displays brief information about an interface. statistics: Displays IS-IS interface statistics. process-id: Displays IS-IS interface information for an IS-IS process specified by its ID in the range of 1 to 65535. Usage guidelines If no interface is specified, the command displays information about all interfaces. If no IS-IS process is specified, the command displays all interface information for all processes. Examples # Display brief IS-IS interface information. display isis interface Interface information for IS-IS(1 Interface: Vlan-interface12 Id IPv4.State IPv6.State 001 Up Down MTU Type DIS 547 L1/L2 Yes/No # Display detailed IS-IS interface information. 141