HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 331
Policy-based routing commands, apply next-hop
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 331 highlights
Policy-based routing commands apply next-hop Use apply next-hop to set a next hop. Use undo apply next-hop to remove the configuration. Syntax apply next-hop [ vpn-instance vpn-instance-name ] { ip-address [ direct ] [ track track-entry-number ] }& undo apply next-hop [ [ vpn-instance vpn-instance-name ] { ip-address }& ] Default No next hop is set. Views Policy node view Predefined user roles network-admin Parameters vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string of 1 to 31 characters. The specified VPN must already exist. If no VPN is specified, the next hop belongs to the public network. ip-address: Specifies the next-hop IP address. direct: Specifies that the next hop must be directly connected to take effect. track track-entry-number: Specifies a track entry by its number in the range of 1 to 1024. &: Indicates that the argument before it can be entered up to n times. The value of n is 2. Usage guidelines You can specify up to n next hops for a policy node by configuring n next hops in the apply next-hop command or by executing the command n times. With a next hop specified, the undo apply next-hop command removes the next hop. Without any next hop specified, the undo apply next-hop command removes all next hops. Examples # Set a directly-connected next hop of 1.1.1.1. system-view [Sysname] policy-based-route aa permit node 11 [Sysname-pbr-aa-11] apply next-hop 1.1.1.1 direct 320