HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 130
ospf timer retransmit, ospf trans-delay
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
Examples # Set the poll timer interval on VLAN-interface 10 to 130 seconds. system-view [Sysname] interface vlan-interface 10 [Sysname-Vlan-interface10] ospf timer poll 130 Related commands ospf timer hello ospf timer retransmit Use ospf timer retransmit to set the LSA retransmission interval on an interface. Use undo ospf timer retransmit to restore the default. Syntax ospf timer retransmit interval undo ospf timer retransmit Default The LSA retransmission interval is 5 seconds on an interface. Views Interface view Predefined user roles network-admin Parameters interval: Specifies the LSA retransmission interval in the range of 1 to 3600 seconds. Usage guidelines After sending an LSA, an interface waits for an acknowledgement packet. If the interface receives no acknowledgement within the retransmission interval, it retransmits the LSA. Set a proper retransmission interval to avoid unnecessary retransmissions. Examples # Set the LSA retransmission interval to 8 seconds on VLAN-interface 10. system-view [Sysname] interface vlan-interface 10 [Sysname-Vlan-interface10] ospf timer retransmit 8 ospf trans-delay Use ospf trans-delay to set the LSA transmission delay on an interface. Use undo ospf trans-delay to restore the default. Syntax ospf trans-delay seconds undo ospf trans-delay 119