HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 197
XXXX.00 format. The, 5678.9abc, and the SEL 00.
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 197 highlights
Use undo network-entity to delete a NET. Syntax network-entity net undo network-entity net Default No NET is configured. Views IS-IS view Predefined user roles network-admin Parameters net: Specifies a NET as a dotted hexadecimal string in the X...X.XXXX....XXXX.00 format. The X...X segment represents the area address, the XXXX....XXXX segment represents the system ID, and the 00 segment is the SEL. Usage guidelines A NET is a special NSAP address with the SEL being 0. The length of the NET is in the range of 8 bytes to 20 bytes. A NET comprises the following parts: • Area ID-With a length of 1 to 13 bytes. • System ID-A system ID uniquely identifies a host or router in the area and has a fixed 6-byte length. • SEL-It has a value of 0 and a fixed 1-byte length. For example, a NET of ab.cdef.1234.5678.9abc.00 specifies the area ID ab.cdef, the system ID 1234.5678.9abc, and the SEL 00. Examples # Specify the NET as 10.0001.1010.1020.1030.00, of which 10.0001 is the area ID and 1010.1020.1030 is the system ID. system-view [Sysname] isis 1 [Sysname-isis-1] network-entity 10.0001.1010.1020.1030.00 Related commands • isis • isis enable preference Use preference to configure the preference for IS-IS. Use undo preference to restore the default. Syntax preference { preference | route-policy route-policy-name } * 186