HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 188
isis timer hello
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 188 highlights
Use undo isis timer csnp to remove the configuration. Syntax isis timer csnp seconds [ level-1 | level-2 ] undo isis timer csnp [ level-1 | level-2 ] Default The default CSNP interval is 10 seconds. Views Interface view Predefined user roles network-admin Parameters seconds: Specifies on the DIS of a broadcast network the interval in seconds for sending CSNP packets, ranging from 1 to 600. level-1: Applies the interval to Level-1. level-2: Applies the interval to Level-2. Usage guidelines If no level is specified, the CSNP interval applies to both Level-1 and Level-2. This command only applies to the DIS of a broadcast network, which sends CSNP packets periodically for LSDB synchronization. Examples # Configure Level-2 CSNP packets to be sent every 15 seconds over VLAN-interface 10. system-view [Sysname] interface vlan-interface 10 [Sysname-Vlan-interface10] isis timer csnp 15 level-2 isis timer hello Use isis timer hello to specify the interval for sending hello packets. Use undo isis timer hello to remove the configuration. Syntax isis timer hello seconds [ level-1 | level-2 ] undo isis timer hello [ level-1 | level-2 ] Default The default hello interval is 10 seconds. Views Interface view Predefined user roles network-admin 177