HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 401
router-id, Parameters, Usage guidelines, Examples, Syntax, Default, Views, Predefined user roles
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 401 highlights
Parameters interface-type interface-number: Specifies an interface by its type and number. all: Specifies all interfaces. Usage guidelines Multiple processes can disable the same interface from receiving and sending OSPFv3 packets, but the silent-interface command takes effect only on interfaces enabled with the current process. Examples # Disable VLAN-interface 10 from receiving and sending OSPFv3 packets in OSPFv3 processes 100 and 200. system-view [Sysname] ospfv3 100 [Sysname-ospfv3-100] router-id 10.100.1.9 [Sysname-ospfv3-100] silent-interface vlan-interface 10 [Sysname-ospfv3-100] quit [Sysname] ospfv3 200 [Sysname-ospfv3-200] router-id 20.100.1.9 [Sysname-ospfv3-200] silent-interface vlan-interface 10 router-id Use router-id to configure a router ID. Use undo router-id to remove the configured router ID. Syntax router-id router-id undo router-id Default No router ID is configured. Views OSPFv3 view Predefined user roles network-admin Parameters router-id: Specifies a router ID, in IPv4 address format. Usage guidelines The router ID is the unique identifier for the device to run OSPFv3 in the AS. An OSPFv3 process cannot run without a router ID. Different processes must have different router IDs. Examples # Configure the router ID 10.1.1.3 for OSPFv3 process 1. system-view [Sysname] ospfv3 1 390