HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 411
policy, con the ACL using one of the following methods, If a protocol is specified
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 411 highlights
Predefined user roles network-admin Parameters acl6-number: Specifies an IPv6 ACL by its number in the range of 2000 to 3999 to filter redistributed routes. prefix-list prefix-list-name: Specifies an IPv6 prefix list by its name, a case-sensitive string of 1 to 63 characters, to filter the redistributed routes. route-policy route-policy-name: Specifies a routing policy by its name, a case-sensitive string of 1 to 63 characters, to filter redistributed routes. protocol: Filters routes redistributed from the specified routing protocol, which can be bgp4+, direct, isisv6, ospfv3, ripng, or static. If no protocol is specified, the command filters routes redistributed from all routing protocols. process-id: Specifies a process by its ID in the range of 1 to 65535. This argument is available only when the protocol is isisv6, ospfv3, or ripng. Usage guidelines This command filters routes redistributed by the ipv6 import-route command. Only routes that have not been filtered can be redistributed. If no protocol is specified, the command filters routes redistributed from all routing protocols. If a protocol is specified, the command filters routes redistributed from the specified routing protocol. To reference an advanced ACL (with a number from 3000 to 3999) in the command or in the routing policy, configure the ACL using one of the following methods: • To deny/permit a route with the specified destination, use the rule [ rule-id ] { deny | permit } ipv6 source sour sour-prefix command. • To deny/permit a route with the specified destination and prefix, use the rule [ rule-id ] { deny | permit } ipv6 source sour sour-prefix destination dest dest-prefix command. The source keyword specifies the destination address of a route and the destination keyword specifies the prefix of the route. The specified prefix must be valid. Otherwise, the configuration does not take effect. Examples # Use IPv6 ACL 2006 to filter redistributed routes. system-view [Sysname] isis 1 [Sysname-isis-1] ipv6 filter-policy 2006 export # Configure IPv6 ACL 3000 to permit only route 2001::1/128 to pass. Use the ACL to filter redistributed routes. system-view [Sysname] acl ipv6 number 3000 [Sysname-acl6-adv-3000] rule 10 permit ipv6 source 2001::1 128 destination ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff 128 [Sysname-acl6-adv-3000] rule 100 deny ipv6 [Sysname-acl6-adv-3000] quit [Sysname] isis 1 [Sysname-isis-1] ipv6 filter-policy 3000 export 400