HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 148
default-route-advertise (IS-IS view), Predefined user roles, Parameters, Examples, Related commands
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 148 highlights
Predefined user roles network-admin Parameters narrow: Receives and sends only narrow cost style packets. (The narrow cost is in the range of 0 to 63.) wide: Receives and sends only wide cost style packets. (The wide cost is in the range of 0 to 16777215.) compatible: Receives and sends both wide and narrow cost style packets. narrow-compatible: Receives both narrow and wide cost style packets, but sends only narrow cost style packets. wide-compatible: Receives both narrow and wide cost style packets, but sends only wide cost style packets. relax-spf-limit: Allows receiving routes with a cost greater than 1023. If this keyword is not specified, any route with a cost bigger than 1023 will be discarded. This keyword is only available when compatible or narrow-compatible is included. Examples # Configure the router to send only narrow cost style packets, but receive both narrow and wide cost style packets. system-view [Sysname] isis 1 [Sysname-isis-1] cost-style narrow-compatible Related commands • circuit-cost • isis cost default-route-advertise (IS-IS view) Use default-route-advertise to advertise a default route of 0.0.0.0/0. Use undo default-route-advertise to restore the default. Syntax default-route-advertise [ [ level-1 | level-1-2 | level-2 ] | route-policy route-policy-name ] * undo default-route-advertise Default Default route advertisement is disabled. Views IS-IS view Predefined user roles network-admin Parameters level-1: Advertises a Level-1 default route. level-1-2: Advertises both Level-1 and Level-2 default routes. 137