HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 405
IPv6 IS-IS configuration commands, display isis redistribute ipv6
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 405 highlights
IPv6 IS-IS configuration commands IPv6 IS-IS supports all the features of IPv4 IS-IS except that it advertises IPv6 routing information. This chapter describes only IPv6 IS-IS exclusive commands. For other IS-IS configuration commands, see "IS-IS configuration commands." display isis redistribute ipv6 Use display isis redistribute ipv6 to display information about redistributed IPv6 IS-IS routes. Syntax display isis redistribute ipv6 [ ipv6-address mask-length ] [ level-1 | level-2 ] [ process-id ] Views Any view Predefined user roles network-admin network-operator Parameters ipv6-address mask-length: Displays redistributed routes for the specified IPv6 address and mask length. process-id: Displays redistributed routes for the IS-IS process specified by its ID in the range of 1 to 65535. level-1: Displays IPv6 IS-IS Level-1 route information. level-2: Displays IPv6 IS-IS Level-2 route information. Usage guidelines If no IPv6 IS-IS level is specified, this command displays both Level-1 and Level-2 route information. Examples # Display information about redistributed IPv6 IS-IS routes. display isis redistribute ipv6 1 Route information for IS-IS(1 Type IntCost State : direct : 0 : Active Level-1 IPv6 Redistribute Table Destination: 12:1::/64 Tag : Level-2 IPv6 Redistribute Table 394