HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 54

all-processes: Enables route redistribution from all the processes of the specified protocol. This keyword takes effect only when the protocol is rip, ospf, or isis. allow-ibgp: Allows redistribution of IBGP routes. This keyword is available when the protocol argument is set to bgp. cost cost: Specifies a cost for redistributed routes, in the range of 0 to 16. The default cost is 0. route-policy route-policy-name: Specifies a routing policy by its name, a case-sensitive string of 1 to 63 characters. tag tag: Specifies a tag for marking redistributed routes, in the range of 0 to 65535. The default is 0. Usage guidelines The import-route bgp command redistributes only EBGP routes. The import-route bgp allow-ibgp command additionally redistributes IBGP routes and might cause routing loops. Therefore, use it with caution. This command redistributes only active routes. To view route state information, use the display ip routing-table protocol command. The undo import-route protocol all-processes command removes only the configuration made by the import-route protocol all-processes command, instead of the configuration made by the import-route protocol process-id command. Examples # Redistribute static routes into RIP, and set the cost for redistributed routes to 4. system-view [Sysname] rip 1 [Sysname-rip-1] import-route static cost 4 Related commands default cost maximum load-balancing Use maximum load-balancing to specify the maximum number of equal-cost multi-path (ECMP) routes for load balancing. Use undo maximum load-balancing to restore the default. Syntax maximum load-balancing number undo maximum load-balancing Views RIP view Predefined user roles network-admin 43