HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 181
isis bfd enable
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 181 highlights
Usage guidelines The password in the specified mode is inserted into all outbound hello packets and is used for authenticating inbound hello packets. Only if the authentication succeeds can the neighbor relationship be formed. For two routers to become neighbors, the authentication mode and password at both ends must be identical. For secrecy, all passwords, including passwords configured in plain text, are saved in cipher text. If you configure a password without specifying a level, the password applies to both Level-1 and Level-2. If neither ip nor osi is specified, the OSI-related fields in LSPs are checked. The level-1 and level-2 keywords are configurable on an interface that has had IS-IS enabled with the isis enable command. Examples # On VLAN-interface 10, configure the authentication mode as simple, and set the plaintext password to 123456. system-view [Sysname] interface vlan-interface 10 [Sysname-Vlan-interface10] isis authentication-mode simple plain 123456 Related commands • area-authentication-mode • domain authentication-mode isis bfd enable Use isis bfd enable to enable BFD. Use undo isis bfd enable to disable BFD. Syntax isis bfd enable undo isis bfd enable Default IS-IS BFD is disabled. Views Interface view Predefined user roles network-admin Examples # Enable BFD for IS-IS on VLAN-interface 11. system-view [Sysname] interface vlan-interface 11 [Sysname-Vlan-interface11] isis enable [Sysname-Vlan-interface11] isis bfd enable 170