HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 440
if-match cost
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 440 highlights
Syntax if-match community { { basic-community-list-number | name comm-list-name } [ whole-match ] | adv-community-list-number }& undo if-match community [ { basic-community-list-number | name comm-list-name } [ whole-match ] | adv-community-list-number ]& Default No community list match criterion is configured. Views Routing policy node view Predefined user roles network-admin Parameters basic-community-list-number: Specifies a basic community list by its number in the range of 1 to 99. adv-community-list-number: Specifies an advanced community list by its number in the range of 100 to 199. comm-list-name: Specifies a community list by its name, a case-sensitive string of 1 to 63 characters that cannot comprise only numbers. whole-match: Exactly matches the specified community list. &: Indicates that the argument before it can be entered up to 32 times. Examples # Configure community list 1 to permit BGP routes with community number 100 or 200. Then configure node 10 in permit mode for routing policy test to use community list 1 to match BGP routes. system-view [Sysname] ip community-list 1 permit 100 200 [Sysname] route-policy test permit node 10 [Sysname-route-policy-test-10] if-match community 1 Related commands • apply community • ip community-list if-match cost Use if-match cost to match routing information having the specified cost. Use undo if-match cost to restore the default. Syntax if-match cost value undo if-match cost Default No cost match criterion is configured. 429