HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 95
verbose, Field, Description, Table 23, Command output
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
interface-type interface-number: Specifies an interface by its type and number. neighbor-id: Specifies a neighbor router ID. Usage guidelines If no OSPF process is specified, this command displays OSPF neighbor information for all OSPF processes. If the verbose keyword is not specified, this command displays brief OSPF neighbor information. If no interface is specified, this command displays the neighbor information for all interfaces. If no neighbor ID is specified, this command displays all neighbor information. Examples # Display detailed OSPF neighbor information. display ospf peer verbose OSPF Process 1 with Router ID 1.1.1.1 Neighbors Area 0.0.0.0 interface 1.1.1.1(Vlan-interface11)'s neighbors Router ID: 1.1.1.2 Address: 1.1.1.2 GR State: Normal State: Full Mode: Nbr is Master Priority: 1 DR: 1.1.1.2 BDR: 1.1.1.1 MTU: 0 Options is 0x02 E|-) Dead timer due in 33 sec Neighbor is up for 02:03:35 Authentication Sequence: [ 0 ] Neighbor state change count: 6 Table 23 Command output Field Area areaID interface IPAddress(InterfaceName)'s neighbors Router ID Address GR State Description Neighbor information of the interface in the specified area: • areaID-Area to which the neighbor belongs. • IPAddress-Interface IP address. • InterfaceName-Interface name. Neighbor router ID. Neighbor router address. GR state. 84