HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 441
if-match extcommunity, Views, Predefined user roles, Parameters, Examples, Syntax, Default
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 441 highlights
Views Routing policy node view Predefined user roles network-admin Parameters value: Specifies a cost in the range of 0 to 4294967295. Examples # Configure node 10 in permit mode for routing policy policy1 to permit routing information with a cost of 8. system-view [Sysname] route-policy policy1 permit node 10 [Sysname-route-policy-policy1-10] if-match cost 8 if-match extcommunity Use if-match extcommunity to match BGP routes whose extended community attribute matches a specified extended community list. Use undo if-match extcommunity to remove the configuration. Syntax if-match extcommunity ext-comm-list-number& undo if-match extcommunity [ ext-comm-list-number& ] Default No match criterion is configured. Views Routing policy node view Predefined user roles network-admin Parameters ext-comm-list-number&: Specifies an extended community list by its number in the range of 1 to 199. & indicates that the argument before it can be entered up to 32 times. Examples # Configure node 10 in permit mode for routing policy policy1 to match BGP routes whose extended community attribute matches extended community lists 100 and 150. system-view [Sysname] ip extcommunity-list 100 permit rt 100:100 [Sysname] ip extcommunity-list 150 permit rt 150:150 [Sysname] route-policy policy1 permit node 10 [Sysname-route-policy-policy1-10] if-match extcommunity 100 150 Related commands • apply extcommunity 430