HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 304
peer preferred-value
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 304 highlights
system-view [Sysname] bgp 200 [Sysname-bgp] ip vpn-instance vpn1 [Sysname-bgp-vpn1] peer 10.1.100.1 password simple aabbcc peer preferred-value Use peer preferred-value to specify a preferred value for routes received from a peer or peer group. Use undo peer preferred-value to restore the default. Syntax In BGP IPv4 unicast instance view/BGP-VPN IPv4 unicast instance view: peer { group-name | ip-address } preferred-value value undo peer { group-name | ip-address } preferred-value In BGP IPv6 unicast instance view: peer { group-name | ipv6-address } preferred-value value undo peer { group-name | ipv6-address } preferred-value In BGP-VPN IPv6 unicast instance view: peer { group-name | ipv6-address } preferred-value value undo peer { group-name | ipv6-address } preferred-value Default The preferred value is 0. Views BGP IPv4 unicast instance view, BGP-VPN IPv4 unicast instance view, BGP IPv6 unicast instance view, BGP-VPN IPv6 unicast instance view Predefined user roles network-admin Parameters group-name: Specifies a peer group by its name, a case-sensitive string of 1 to 47 characters. The peer group must have been created. ip-address: Specifies a peer by its IP address. The peer must have been created. ipv6-address: Specifies a peer by its IPv6 address. The peer must have been created. value: Specifies the preferred value in the range of 0 to 65535. Usage guidelines If multiple routes that have the same destination are learned from different peers, you can specify different preferred values for the routes as needed to control BGP path selection. The one with the greatest preferred value is selected as the optimal route to the destination. The preferred value is used for route selection on the local router and is not advertised to the peer. It has only local significance. 293