HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 200
set-overload
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 200 highlights
Predefined user roles network-admin Parameters system-id: Specifies an IS-IS neighbor by its system ID. process-id: Specifies an IS-IS process by its ID in the range of 1 to 65535 to clear data structure information for the neighbor in the specified IS-IS process. Usage guidelines Use this command when you re-establish an IS-IS neighbor relationship. Examples # Clear the data structure information of the neighbor with the system ID 0000.0c11.1111. reset isis peer 0000.0c11.1111 set-overload Use set-overload to set the overload bit. Use undo set-overload to clear the overload bit. Syntax set-overload [ on-startup [ [ start-from-nbr system-id [ timeout1 [ nbr-timeout ] ] ] | timeout2 ] [ allow { external | interlevel } * ] undo set-overload Default The overload bit is not set. Views IS-IS view Predefined user roles network-admin Parameters on-startup: Sets the overload bit upon system startup. start-from-nbr system-id [ timeout1 [ nbr-timeout ] ]: Starts the nbr-timeout timer when the router begins to establish the neighbor relationship with the neighbor after system startup. If the neighbor relationship is formed within the nbr-timeout interval, IS-IS keeps the overload bit set. If not, the bit is cleared. IS-IS keeps the overload bit set within the timeout1 interval after the neighbor relationship is formed within the nbr-timeout interval. • system-id-Specifies the neighbor. • timeout1-The timeout1 interval is in the range of 5 to 86400 seconds and defaults to 600 seconds. • nbr-timeout-The timer has an interval from 5 to 86400 seconds. The default is 1200 seconds. timeout2: Sets the overload bit within the timeout2 interval after system startup. The interval is in the range of 5 to 86400 seconds and defaults to 600 seconds. 189