HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 267
with AS number 200, and add EBGP peers 10.1.1.1 and, In BGP view, create an EBGP peer group
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 267 highlights
Predefined user roles network-admin Parameters group-name: Specifies a name for the peer group, a case-sensitive string of 1 to 47 characters. external: Creates an EBGP peer group. internal: Creates an IBGP peer group. Usage guidelines In a large-scale network, many peers can use the same route selection policy. You can configure a peer group and add these peers into this group. In this way, peers can share the same policy as the peer group. When the policy of the group is modified, the modification also applies to peers in it. If the internal or external keyword is not specified, the command creates an IBGP peer group. If you perform configurations on a peer group and peers of the peer group, the last configuration takes effect. After you create a peer group, you must use the peer enable command to enable BGP to exchange routing information with the specified peer group. Examples # In BGP view, create an EBGP peer group test with AS number 200, and add EBGP peers 10.1.1.1 and 10.1.2.1 into the group. system-view [Sysname] bgp 100 [Sysname-bgp] group test external [Sysname-bgp] peer test as-number 200 [Sysname-bgp] peer 10.1.1.1 group test [Sysname-bgp] peer 10.1.2.1 group test # In BGP-VPN instance view, create an EBGP peer group test with AS number 200, and add EBGP peers 10.1.1.1 and 10.1.2.1 into the group. system-view [Sysname] bgp 100 [Sysname-bgp] ip vpn-instance vpn1 [Sysname-bgp-vpn1] group test external [Sysname-bgp-vpn1] peer test as-number 200 [Sysname-bgp-vpn1] peer 10.1.1.1 group test [Sysname-bgp-vpn1] peer 10.1.2.1 group test # In BGP view, create an EBGP peer group test with AS number 200, and add EBGP peers 1::1 and 1::2 into the group. system-view [Sysname] bgp 100 [Sysname-bgp] group test external [Sysname-bgp] peer test as-number 200 [Sysname-bgp] peer 1::1 group test [Sysname-bgp] peer 1::2 group test # In BGP-VPN instance view, create an EBGP peer group test with AS number 200, and add EBGP peers 1::1 and 1::2 into the group. system-view 256