HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 76

Parameters cost: Specifies a cost for the default route advertised to the Stub or NSSA area, in the range of 0 to 16777214. Usage guidelines This command takes effect only on the ABR of a stub area or the ABR/ASBR of an NSSA area. Examples # Configure Area 1 as a stub area, and specify the cost of the default route advertised to the stub area as 20. system-view [Sysname] ospf 100 [Sysname-ospf-100] area 1 [Sysname-ospf-100-area-0.0.0.1] stub [Sysname-ospf-100-area-0.0.0.1] default-cost 20 Related commands • nssa • stub default-route-advertise (OSPF view) Use default-route-advertise to redistribute a default route into the OSPF routing domain. Use undo default-route-advertise to restore the default. Syntax default-route-advertise [ [ [ always | permit-calculate-other ] | cost cost | route-policy route-policy-name | type type ] * | summary cost cost ] undo default-route-advertise Default No default route is redistributed into the OSPF routing domain. Views OSPF view Predefined user roles network-admin Parameters always: Generates a default route in a Type-5 LSA into the OSPF routing domain regardless of whether or not there is a default route in the routing table. If this keyword is not specified, the router generates a default route in a Type-5 LSA into the OSPF routing domain only when an active default route that does not belong to the current OSPF process exists in the IP routing table. permit-calculate-other: Enables OSPF to calculate default routes received from other routers. Without this keyword, OSPF does not calculate default routes from other routers. If the router does not generate any default route in a Type-5 LSA into the OSPF routing domain, the router calculates default routes from other routers regardless of whether this keyword is specified. 65