HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 309
peer route-limit
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 309 highlights
Examples # In BGP IPv4 unicast instance view, configure the local device as a route reflector and specify the IBGP peer group test as a client. system-view [Sysname] bgp 100 [Sysname-bgp] ipv4-family unicast [Sysname-bgp-ipv4] peer test reflect-client # In BGP-VPN IPv6 unicast instance view, configure the local device as a route reflector and specify the IBGP peer group test as a client. system-view [Sysname] bgp 100 [Sysname-bgp] ip vpn-instance vpn1 [Sysname-bgp-vpn1] ipv6-family unicast [Sysname-bgp-ipv6-vpn1] peer test reflect-client Related commands • reflect between-clients • reflector cluster-id peer route-limit Use peer route-limit to specify the maximum number of routes that can be received from a peer or peer group. Use undo peer route-limit to restore the default. Syntax In BGP IPv4 unicast instance view/BGP-VPN IPv4 unicast instance view: peer { group-name | ip-address } route-limit prefix-number [ { alert-only | reconnect reconnect-time } | percentage-value ] * undo peer { group-name | ip-address } route-limit In BGP IPv6 unicast instance view: peer { group-name | ipv6-address } route-limit prefix-number [ { alert-only | reconnect reconnect-time } | percentage-value ] * undo peer { group-name | ipv6-address } route-limit Default The number of routes that can be received from a peer or peer group is not limited. Views BGP IPv4 unicast instance view, BGP-VPN IPv4 unicast instance view, BGP IPv6 unicast instance view Predefined user roles network-admin Parameters group-name: Specifies a peer group by its name, a case-sensitive string of 1 to 47 characters. The peer group must have been created. 298