HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 389
lsa-generation-interval
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 389 highlights
Usage guidelines This feature enables the device to output information about neighbor state changes to the configuration terminal. Examples # Disable the logging of neighbor state changes for OSPFv3 process 100. system-view [Sysname] ospfv3 100 [Sysname-ospfv3-100] undo log-peer-change lsa-generation-interval Use lsa-generation-interval to configure the OSPFv3 LSA generation interval. Use undo lsa-generation-interval to restore the default. Syntax lsa-generation-interval maximum-interval [ minimum-interval [ incremental-interval ] ] undo lsa-generation-interval Default The maximum interval is 5 seconds, the minimum interval is 0 milliseconds, and the incremental interval is 0 milliseconds. Views OSPFv3 view Predefined user roles network-admin Parameters maximum-interval: Specifies the maximum OSPFv3 LSA generation interval in the range of 1 to 60 seconds. minimum-interval: Specifies the minimum OSPFv3 LSA generation interval in the range of 10 to 60000 milliseconds. The default is 0, which indicates that the minimum interval can be any value. incremental-interval: Specifies the OSPFv3 LSA generation incremental interval in the range of 10 to 60000 milliseconds. Usage guidelines When network changes are not frequent, LSAs are generated at the minimum-interval. If network changes become frequent, the LSA generation interval is incremented by incremental-interval × 2n-2 (n is the number of generation times) each time a LSA generation occurs until the maximum-interval is reached. The minimum interval and the incremental interval cannot be greater than the maximum interval. Examples # Configure the maximum LSA generation interval as 2 seconds, minimum interval as 100 milliseconds, and incremental interval as 100 milliseconds. system-view [Sysname] ospfv3 100 378