HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 178
import-route limit
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 178 highlights
Views IS-IS view Predefined user roles network-admin Parameters filter-policy: Specifies a filtering policy. acl-number: Specifies an ACL by its number in the range of 2000 to 3999 to filter routes from Level-2 to Level-1. prefix-list prefix-list-name: Specifies an IPv4 prefix list by its name, a case-sensitive string of 1 to 63 characters, to filter routes from Level-2 to Level-1 by destination address. route-policy route-policy-name: Uses the specified routing policy to filter routes from Level-2 to Level-1. The route-policy-name argument is a case-sensitive string of 1 to 63 characters. tag tag: Specifies a tag for marking redistributed routes, in the range of 1 to 4294967295. Usage guidelines If a routing policy is used, the routing policy must be specified in the import-route isis level-2 into level-1 command to filter routes from Level-2 to Level-1. Other routing policies specified for route reception and redistribution does not affect the route leaking. If a filtering policy is configured, only Level-2 routes not filtered out can be advertised into the Level-1 area. Examples # Enable route advertisement from Level-2 to Level-1. system-view [Sysname] isis 1 [Sysname-isis-1] import-route isis level-2 into level-1 Related commands • import-route • import-route isis level-1 into level-2 import-route limit Use import-route limit to configure the maximum number of redistributed Level 1/Level 2 IPv4 routes. Use undo import-route limit to restore the default. Syntax import-route limit number undo import-route limit Default The maximum number of redistributed Level 1/Level 2 IPv4 routes is not configured. Views IS-IS view 167