HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 240
display bgp routing-table flap-info ipv4 unicast, Related commands, Syntax, Views
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 240 highlights
Related commands • dampening • reset bgp dampening ipv6 unicast display bgp routing-table flap-info ipv4 unicast Use display bgp routing-table flap-info ipv4 unicast to display BGP IPv4 unicast route flap statistics. Syntax display bgp routing-table flap-info ipv4 [ unicast ] [ vpn-instance vpn-instance-name ] [ network-address [ { mask | mask-length } [ longest-match ] ] | as-path-acl as-path-acl-number ] Views Any view Predefined user roles network-admin network-operator Parameters vpn-instance vpn-instance-name: Specifies an MPLS L3VPN by its name, a case-sensitive string of 1 to 31 characters. If no VPN is specified, the command displays BGP IPv4 unicast route flap statistics for the public. network-address: Specifies a destination network address. mask: Specifies a network mask, in dotted decimal notation. mask-length: Specifies a mask length in the range of 0 to 32. longest-match: Displays the routing entries selected through the following steps: 1. AND the specified network address with the specified mask. 2. Display the route with the longest mask among the matching routes that have a mask shorter than or equal to the specified mask. as-path-acl as-path-acl-number: Specifies an AS path list by its number in the range of 1 to 256 to filter BGP IPv4 unicast route flap statistics. Usage guidelines When you execute the display bgp routing-table flap-info ipv4 unicast command: • If the network-address, mask, and mask-length arguments are not specified, the command displays flap statistics of all BGP IPv4 unicast routes for the public network or the specified VPN. • If only the network-address argument is specified, the system ANDs the network address with the mask of a route. If the result matches the network address of the route, the command displays flap statistics of the route. • If the network-address mask or network-address mask-length argument is specified, and the longest-match keyword is not specified, the command displays flap statistics of the BGP IPv4 unicast route that matches both the specified destination network address and the mask (or mask length). The command with the unicast keyword has the same effect as that without the unicast keyword. 229