HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 443
if-match route-type, Predefined user roles, Parameters, Examples, Syntax, Default, Views
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 443 highlights
Predefined user roles network-admin Parameters preference: Specifies a local preference in the range of 0 to 4294967295. Examples # Create node 10 in permit mode for routing policy policy1 to match BGP routes having a local preference of 2. system-view [Sysname] route-policy policy1 permit node 10 [Sysname-route-policy-policy1-10] if-match preference 2 if-match route-type Use if-match route-type to configure a route-type match criterion. Use undo if-match route-type to remove the configuration. Syntax if-match route-type { external-type1 | external-type1or2 | external-type2 | internal | is-is-level-1 | is-is-level-2 | nssa-external-type1 | nssa-external-type1or2 | nssa-external-type2 } * undo if-match route-type [ external-type1 | external-type1or2 | external-type2 | internal | is-is-level-1 | is-is-level-2 | nssa-external-type1 | nssa-external-type1or2 | nssa-external-type2 ] * Default No route-type match criterion is configured. Views Routing policy node view Predefined user roles network-admin Parameters external-type1: Matches OSPF Type 1 external routes. external-type1or2: Matches OSPF Type 1 and Type 2 external routes. external-type2: Matches OSPF Type 2 external routes. internal: Matches OSPF internal routes (including OSPF intra-area and inter-area routes). is-is-level-1: Matches IS-IS Level-1 routes. is-is-level-2: Matches IS-IS Level-2 routes. nssa-external-type1: Matches OSPF NSSA Type 1 external routes. nssa-external-type1or2: Matches OSPF NSSA Type 1 and 2 external routes. nssa-external-type2: Matches OSPF NSSA Type 2 external routes. Examples # Configure node 10 in permit mode for routing policy policy1 to match OSPF internal routes. system-view 432