HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 337
reset ip policy-based-route statistics
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 337 highlights
Usage guidelines If the specified policy node already exists, the command directly places you into policy node view. A policy that has been applied to an interface cannot be removed. To remove it, you must first cancel the application. If a policy node is specified, the undo policy-based-route command removes the specified policy node; if a match mode is specified, the command removes all nodes configured with the match mode; if no policy node or match mode is specified, the command removes the whole policy. Examples # Create permit-mode of Node 10 for policy policy1 and enter policy node view. system-view [Sysname] policy-based-route policy1 permit node 10 [Sysname-pbr-policy1-10] Related commands display ip policy-based-route reset ip policy-based-route statistics Use reset ip policy-based-route statistics to clear PBR statistics. Syntax reset ip policy-based-route statistics [ policy policy-name ] Views User view Predefined user roles network-admin Parameters policy policy-name: Specifies a policy by its name, a case-sensitive string of 1 to 19 characters. Usage guidelines If no policy is specified, the command clears all PBR statistics. If a policy is specified, the command clears the PBR statistics for the specified policy. To view PBR statistics, use the display ip policy-based-route interface command. Examples # Clear all PBR statistics. reset ip policy-based-route statistics Related commands display ip policy-based-route interface 326