HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 424
if-match acl, ipv6 policy-based-route (interface view
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 424 highlights
Policy Name pr01 Table 96 Command output Interface Name Vlan-interface11 Field policy Name Interface Name Description Policy name. Interface where the policy is applied. Related commands ipv6 policy-based-route (interface view) if-match acl Use if-match acl to configure an ACL match criterion. Use undo if-match acl to remove the ACL match criterion. Syntax if-match acl acl-number undo if-match acl Default No ACL match criterion is configured. Views IPv6 policy node view Predefined user roles network-admin Parameters acl-number: Specifies an ACL by its number in the range of 2000 to 3999. The number range of a basic ACL is 2000 to 2999 and that of an advanced ACL is 3000 to 3999. Examples # Configure Node 10 of policy aa to permit the packets matching ACL 2000. system-view [Sysname] ipv6 policy-based-route aa permit node 10 [Sysname-pbr6-aa-10] if-match acl 2000 ipv6 policy-based-route (interface view) Use ipv6 policy-based-route to configure IPv6 interface PBR by applying an IPv6 policy to an interface. Use undo ipv6 policy-based-route to remove the configuration. Syntax ipv6 policy-based-route policy-name undo ipv6 policy-based-route 413