HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 65
rip summary-address
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Syntax rip split-horizon undo rip split-horizon Default The split horizon function is enabled. Views Interface view Predefined user roles network-admin Usage guidelines • The split horizon function prevents routing loops. If you want to disable the function, make sure that the operation is dispensable. • If both split horizon and poison reverse are enabled, only the poison reverse function takes effect. Examples # Enable the split horizon function on VLAN-interface 10. system-view [Sysname] interface vlan-interface 10 [Sysname-Vlan-interface10] rip split-horizon rip summary-address Use rip summary-address to configure RIPv2 to advertise a summary route on an interface. Use undo rip summary-address to remove the configuration. Syntax rip summary-address ip-address { mask | mask-length } undo rip summary-address ip-address { mask | mask-length } Default RIPv2 does not advertise a summary route. Views Interface view Predefined user roles network-admin Parameters ip-address: Specifies the destination IP address of the summary route. mask: Specifies the subnet mask of the summary route, in dotted decimal notation. mask-length: Specifies the subnet mask length of the summary route, in the range of 0 to 32. Usage guidelines This command takes effect only when automatic route summarization is disabled. 54