HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 51
filter-policy import, Syntax, Default, Views, Predefined user roles, Parameters, Usage guidelines
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
• import-route • ip prefix-list filter-policy import Use filter-policy import to configure RIP to filter received routes. Use undo filter-policy import to restore the default. Syntax filter-policy { acl-number | gateway prefix-list-name | prefix-list prefix-list-name [ gateway prefix-list-name ] } import [ interface-type interface-number ] undo filter-policy import [ interface-type interface-number ] Default RIP does not filter received routes. Views RIP view Predefined user roles network-admin Parameters acl-number: Specifies an ACL by its number in the range of 2000 to 3999 to filter received routes. prefix-list prefix-list-name: Specifies an IP prefix list by its name, a string of 1 to 63 characters, to filter received routes. gateway prefix-list-name: Specifies an IP prefix list by its name, a string of 1 to 63 characters, to filter routes from the gateway. interface-type interface-number: Specifies an interface by its type and number. Usage guidelines To reference an advanced ACL (with a number from 3000 to 3999) in the command, configure the ACL using one of the following methods: • To deny/permit a route with the specified destination, use the rule [ rule-id ] { deny | permit } ip source sour-addr sour-wildcard command • To deny/permit a route with the specified destination and mask, use the rule [ rule-id ] { deny | permit } ip source sour-addr sour-wildcard destination dest-addr dest-wildcard command. The source keyword specifies the destination address of a route and the destination keyword specifies the subnet mask of the route. The subnet mask must be contiguous. Otherwise, the mask configuration does not take effect. Examples # Use ACL 2000 to filter received RIP routes. system-view [Sysname] acl number 2000 [Sysname-acl-basic-2000] rule deny source 192.168.10.0 0.0.0.255 [Sysname-acl-basic-2000] quit [Sysname] rip 1 40