HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 114
ispf enable, log-peer-change, Examples, Related commands, Syntax, Default, Views
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
Only active routes can be redistributed. To view information about active routes, use the display ip routing-table protocol command. The undo import-route protocol all-processes command removes only the configuration made by the import-route protocol all-processes command, instead of the configuration made by the import-route protocol process-id command. Examples # Redistribute routes from RIP process 40 and specify the type, tag, and cost as 2, 33, and 50 for redistributed routes. system-view [Sysname] ospf 100 [Sysname-ospf-100] import-route rip 40 type 2 tag 33 cost 50 Related commands default-route-advertise ispf enable Use ispf enable to enable OSPF incremental SPF (ISPF). Use undo ispf enable to disable OSPF ISPF. Syntax ispf enable undo ispf enable Default OSPF ISPF is enabled. Views OSPF view Predefined user roles network-admin Usage guidelines Upon topology changes, ISPF recomputes only the affected part of the SPT, instead of the entire SPT. Examples # Enable ISPF for OSPF process 100. system-view [Sysname] ospf 100 [Sysname-ospf-100] ispf enable log-peer-change Use log-peer-change to enable the logging of OSPF neighbor state changes. Use undo log-peer-change to disable the logging of OSPF neighbor state changes. Syntax log-peer-change 103